#

Specialists in Stainless Steel Wire, Bar, & Aluminium Supplies – SWS Ltd
Bright Steel, Carbon Steel, Alloy Steel & Free Machining Bar


Material Grades:
The term "Stainless Steel" is a generic one, covering various grades & categories, each with it's own specific characteristics, and relevant benefits. Whilst all are released to the latest En & Din Standards, we have listed the grades in the more commonly used BS versions:

Austenitic:
201, 202, 203, 204Cu (For more details, please refer to the information page)
301, 302, 303, 303Cu, 304/L, 304Cu, 304S, 305, 310S, 314, 316/L, 316Cu
316Ti. 317L, 321
307Si, 308H, 308L/LSi, 309L/LSi, 309LMo, 310, 312, 316L/LSi, 318/Si, 347/Si

Ferritic:
409Cb, 409Ti, 430/F, 430LNb, 434

Martensitic:
410, 416, 420B/C, 420NiMo, 431

Precipitation Hardening:
17-4PH

Duplex & High Alloy:
253MA*, 254SMO*, 904L, SAF 2205, Duplex 2209, Duplex 2594
A286
LDX 2101*, SAF2304** (For more details, please refer to the information page)
Alloy 82, Alloy 200, Alloy 400, Alloy 600, Alloy 601, Alloy 625
Alloy 800, Alloy 825, Ni80/Cr20, C276, C22, X61, X60

*Registered trademark of Outokumpu/ Avesta
**Registered trademark of Sandvik

Welding Consumables : 
ER 307/Si, 308L/LSi, 308H, 308LMo, 309L/LSi, 309LMo, 310, 312, 316L/LSi, 316H, 317/L,
347/Si, 409/Cb, 410/NiMo, 420, 430, 630 & 2209 Duplex

Aluminium for Welding :
EN AW 1050A, 1080A, 1100, 4043A, 4047, 5356, 5556, 5183, 5754

Aluminium for General Purpose :
Series 1000, 2000, 3000, 4000, 5000, 6000 & 7000

Titanium Wire & Bar :
A Full List of Sizes & Grades available will be added shortly

Bright Carbon Steel Bar :
SAE1008, SAE1010, SAE1012, SAE1015, SAE1018, SAE1020, SAE1026, SAE1035, SAE1045, EN8, EN9, EN3A, EN3B, C-15, C-35, C-40, C-45

Free Cutting Steel :
EN1A, EN1A (L), EN8M, EN15AM, SAE-1117, SAE-1140, SAE-1141, SAE1146, VS13113, SAE-12L14

Alloy Steel :
EN18, EN18C, EN19, EN19C, SAE-4140, 42CrMo4, 27C15, 16MnCr5, 20MnCr5, EN18B, SAE8620, SAE-4340




Products:

 

• Size Range: 1.50mm - 15.0mm Dia

• Condition: Annealed / Annealed & Drawn (Tensile as required)

• Finish: Surface coating as required

• Supply Form: 50kg - 1000kg Coils on Pallets / Formers

• Size Range: 1.50mm - 15.0mm Dia

• Condition: Bright Annealed / Bright Drawn (Tensile as required)

• Finish: Bright / Dull / Lightly Oiled

• Supply Form: 50kg - 1000kg Coils on Pallets / Formers / Loose

• Size Range: 5.50mm - 26.30mm Dia

• Condition: Hot Rolled / Annealed & Pickled

• Supply Form: 500kg - 600kg Coils

• Size Range: 0.10mm - 3.0mm Dia

• Condition: Fully Annealed / High Tensile (Tensile as required)

• Finish: Diamond Drawn, Bright / Lightly Oiled

• Supply Form: 4.0kg - 400kg Din Spools

• Size Range: 2.0mm - 80.0mm Dia

• Condition: Cold Drawn & Polished / Peeled & Polished

• Tolerances: H8, H9, H10, H11

• Supply Form: 1.0 - 12.0 Mtr Lengths / 100 - 1000kg protected bundles.

• Size Range: 25.0mm - 84.0mm Dia

• Condition: Hot Rolled & Straightened / Hot Rolled Annealed & Straightened

• Tolerances: K12

• Supply Form: 1.0 - 12.0 Mtr Lengths / 100 - 1000kg protected bundles

Aluminium General Purpose

• Size Range: 0.50mm - 20.0mm Dia
  
• Condition: Wire, Drawn Bar & Profiles
  
• Finish: Bright, Clean & Smooth
  
• Supply Form:  
  
  • Wire: 0.50kg - 1000 kg Spools, Coils on Formers / Pallets 
  • Bar:   3.0mtr Lengths / 100kg - 500kg Boxed / Bundles

   

  
  

   

 Bright Steel / Alloy Bar

• Cold Drawn Bar: 4.0mm - 65.0mm Dia
  
• Cold Drawn & Ground Bar: 8.0mm - 65.0mm Dia
  
• Peeled & Polished / Ground: 20.0mm - 155.0mm Dia
  
• Cold Drawn Hexagon: 5.0mm - 70.0mm A/F
  
• Cold Drawn Square: 5.0mm - 60.0mm A/F
  
• Cold Drawn Flats: 6.0mm x 3.0mm to 125.0mm x 25.0mm Flat
  
• Special Products: Pump Shaft Quality; Quenched & Tempered; Profiles
  

----------------------------------------------------------------------------------------------------------------------------------------------

NB. The above gives only basic information of the materials & grades available, though more specific information & mill brochures are available on request . Alternatively, please use the links on the Information page, to take you direct to the Manufacturer's website, where more technical details are available.



We thank you for your time & welcome any enquiries you may have using the contact details shown opposite.

Stainless Steel Wire, Bar, & Aluminium Supplies – SWS Ltd
Bright Steel, Carbon Steel, Alloy Steel & Free Machining Bar



Back to Top